Filter
Top Products
6.3 RECALLING A CAMERA VIEW (PTZ PRESET POSITION)
To recall a PTZ camera view the following must first be true.
1. you must currently be selecting a monitor,
2. the monitor must be displaying the desired camera,
3. the desired camera must have PTZ equipment fitted with VIEW (preset) capability.
Press the
key followed by the view number required. The range of valid views
are (0 Ù 9). A total of ten views per camera PTZ site are available.
• for example, .. selects camera view 5,
• or
.. selects camera view 0.
The monitor will briefly display the message:
CAUTION: VIEW (0) is commonly used as a HOME
position, to quickly reposition the camera to the desired
static scene.
6.4 CAMERA PTZ FLASHBACK
To use the camera FLASHBACK feature, the following must first be true.
1. You must currently be selecting a monitor,
2. The monitor must be displaying the desired camera,
3. The desired camera must be a high-speed dome camera (PT-720 or equivalent)
fitted with preset view capability,
4. You must be using an HEGS5300 enhanced keyboard.
Rev. A 6-3 HMXMU001056
03/16/05