Filter
Top Products
6.4 CAMERA PTZ FLASHBACK, CONTINUED
Press the key to move to the first FLASHBACK position. This is similar to
recalling a preset view, although the prior position is first remembered. The dome PTZ
can be operated manually as required.
To go back to the prior position, press the
key. Now your current position
is remembered and the prior position is recalled. The FLASHBACK feature allows two
separate targets to be followed using the one high-speed dome camera.
Recalling a preset view will first cause your current position to be remembered as the
next FLASHBACK position.
6.5 SELECTING AN ALTERNATE CAMERA
For every camera, it is possible to have a pre-defined alternate camera. Often the
alternate camera is a PTZ camera and view recall position, or simply another fixed
camera giving a different viewing angle of the same scene.
To display an alternate camera, the following must first be true.
1. You must currently be selecting a monitor,
2. The monitor must be displaying a camera,
3. The camera must have been commissioned with a pre-defined alternate camera
selection.
4. You must be using a HEGS5300 enhanced keyboard.
Press the
key to select the alternate camera (and view recall position). The
monitor should now be displaying the alternate camera. If the message prompt;
was displayed, no alternate camera is available.
Pressing the
key again will re-select the original camera.
Rev. A 6-4 HMXMU001056
03/16/05