Filter
Top Products
3.7 CHANGING THE DWELL PERIOD, CONTINUED
Use the key to move backwards in the scan sequence. Continue pressing the
key until the beginning of the scan sequence list is reached (that is, before Entry
(1)).
Entry position in Scan Sequence 0 1 2 3 4 5
Camera No.
dwell
period
2 25 12 29 14
Current entry position selected
*
Table 3.10: Using The Key To Move To Entry (0).
The message:
will be displayed briefly, together with the current dwell setting (in seconds). The valid
dwell period is (01 Ù 99) seconds.
Now, enter the new dwell period:
• for example,
.. new Dwell = 15 seconds.
• or
.. new Dwell = 3 seconds.
To start the scan sequence running again, press the
key once. The message:
will be displayed briefly. Scan sequence 20 is now running.
Rev. A 3-12 HMXMU001056
03/16/05