Filter
Top Products
The keyboard unit is connected to the system board with
flexible cables.
Warning: Do not pull the keyboard cables.
The keyboard cables can be damaged if the keyboard
is disconnected without releasing the three latches
5.
EMI Spring Plate
Notes:
1. When replacing the keyboard, check that the three
cables are clean, and inserted straight and fully into
the connectors. Slide both ends of each latch at the
same time to make sure that each cable is correctly
inserted. Go to “Keyboard/Auxiliary Input Device
Checkout” on page 396 and test all keys before
returning the computer to the customer.
2. When replacing the top cover, insert the four latches
at the rear side of the cover into the foot guide of the
LCD; push the right, left, and front sides to snap it
into place.
Use the following table for reference when replacing parts.
Step Location (Quantity) Length
2 Top cover (3) 4 mm
Note: Make sure you use the correct screw.
436 IBM Mobile Systems HMM