Filter
Top Products
Single and Multipart Form Specifications
Specification Value
Minimum width: 50 mm (2 in.)
Maximum thickness of multipart forms: 0.47 mm (0.0185 in.)
Maximum thickness of front sheet, multipart
forms:
0.08 mm (0.003 in.)
Minimum thickness of single-part form: 0.10 mm (0.004 in.)
Note: Test all forms in the printer to ensure acceptable performance prior to buying
a significant quantity. There should be no binding holes or other holes within
10 mm (0.4 in.) from the right edge of the form.
Print Ribbons (Models TI5 and TG5 Only)
The ribbon is an Epson ERC-35 or equivalent.
Attention: Using an inferior grade of ribbon can affect print quality and the life of
printheads and the printer mechanism.
updated March 18, 2002
Appendix A. Consumable Supplies 75