Intel® Xeon® Processor E5-1600 v2/E5-2600 v2 Product Families 143
Datasheet Volume One of Two
Electrical Specifications
Notes:
1. Unless otherwise noted, all specifications in this table apply to all processors. These specifications are based on final silicon
characterization.
2. Launch to FMB, this is the flexible motherboard guidelines. See Section 7.6 for FMB details.
3. I
CC_TDC
(Thermal Design Current) is the sustained (DC equivalent) current that the processor is capable of drawing
indefinitely and should be used for the voltage regulator thermal assessment. The voltage regulator is responsible for
monitoring its temperature and asserting the necessary signal to inform the processor of a thermal excursion. Please refer to
the compatible VR12.0 PWM controller for further details.
4. Specification is at T
CASE
= 50°C. Characterized by design and not tested.
5. I
CCD_01_MAX
and I
CCD_23_MAX
refers only to the processor’s current draw and does not account for the current consumption by
the memory devices. This only applies to Intel® Xeon® processor E5-1600 v2/E5-2600 v2 product families.
6. Minimum V
CC
and maximum I
CC
are specified at the maximum processor case temperature (T
CASE
) shown in Chapter 5,
"Thermal Management Specifications". I
CC_MAX
is specified at the relative V
CC_MAX
point on the V
CC
load line. The processor is
capable of drawing I
CC_MAX
for up to 5 seconds. Refer to Figure 7-4 for further details on the average processor current draw
over various time durations.
7. Memory Standby Current is characterized by design and not tested.
8. Refer to Table 1-1 for the model numbers of each processor based on TDP and core count.
9. To determine which SKUS are for workstation platforms, refer to Section 5.1.3.
Table 7-12. Processor Current Specifications
Parameter Symbol and
Definition
Processor TDP / Core Count TDC (A) Max (A) Notes
1
I
TT
I/O Termination Supply,
Processor Current on V
TTA
/V
TTD
All Intel® Xeon® processor E5-1600
v2/E5-2600 v2 product families
20 24
2, 5, 6
I
SA
System Agent Supply,
Processor Current on V
SA
20 24
I
CCD_01
DDR3 Supply, Processor
Current V
CCD_01
34
I
CCD_23
DDR3 Supply, Processor
Current V
CCD_23
34
I
CCPLL
PLL Supply, Processor Current
on V
CCPLL
22
I
CCD_S3
Total processor current on
V
CCD_01
/V
CCD_23
in System S3 Standby State
-- 0.5 7
I
CC
Core Supply, Processor Current
on V
CC
150W (WS) 8-core 155 185 2, 5, 6
130W 1U 12/10/8-core, 130W 1S WS 6-
core
135 165
130W 2U 8-core (E5-2667 v2) 135 165
130W 2U 6/4-core, 130W 1S WS 4-core 115 150
115W 12/10-core 135 165
95W 10/8/6/4-core 115 135
80W 6/4-core 80 100
70W 10-core 80 100
60W 6-core 70 85
LV95W-10C 115 135
LV70W-10C, LV70W-8C 80 100
LV50W-6C 60 80