Filter
Top Products
Electrical Specifications
152 Intel® Xeon® Processor E5-1600 v2/E5-2600 v2 Product Families
Datasheet Volume One of Two
Notes:
1. IVT_ID_N land is pulled to ground on the package.
7.8.3.1 PCI Express* DC Specifications
The processor DC specifications for the PCI Express* are available in the PCI Express
Base Specification - Revision 3.0. This document will provide only the processor
exceptions to the
PCI Express Base Specification - Revision 3.0.
7.8.3.2 DMI2/PCI Express* DC Specifications
The processor DC specifications for the DMI2/PCI Express* are available in the PCI
Express Base Specification 2.0 and 1.0. This document will provide only the processor
exceptions to the
PCI Express Base Specification 2.0 and 1.0.
7.8.3.3 Intel® QuickPath Interconnect DC Specifications
Intel QuickPath Interconnect specifications are defined at the processor lands. Please
refer to the appropriate platform design guidelines for specific implementation details.
In most cases, termination resistors are not required as these are integrated into the
processor silicon.
7.8.3.4 Reset and Miscellaneous Signal DC Specifications
For a power-on Reset, RESET_N must stay active for at least 3.5 millisecond after V
CC
and BCLK{0/1} have reached their proper specifications. RESET_N must not be kept
asserted for more than 100 ms while PWRGOOD is asserted. RESET_N must be held
asserted for at least 3.5 millisecond before it is deasserted again. RESET_N must be
held asserted before PWRGOOD is asserted. This signal does not have on-die
termination and must be terminated on the system board.
Table 7-22. Miscellaneous Signals DC Specifications
Symbol Parameter Min Typical Max Units Notes
IVT_ID_N Signal
V
O_ABS_MAX
Output Absolute Max Voltage 1.10 1.80 V 1
I
O
Output Current 0 μA1, 3
SKTOCC_N Signal
V
O_ABS_MAX
Output Absolute Max Voltage 3.30 3.50 V 1
I
OMAX
Output Max Current 1 mA 2