Intel MPCBL0010 Personal Computer User Manual


 
MPCBL0010 SBC—Specifications
Intel NetStructure
®
MPCBL0010 Single Board Computer
Technical Product Specification October 2006
38 Order Number: 304120
4.3 Reliability Specifications
4.3.1 Mean Time Between Failure (MTBF) Specifications
Calculation Type: MTBF/FIT Rate
Standard: Telcordia* Standard SR-332 Issue 1
Methods: Method I, Case I, Quality Level II
The calculation results were generated using the references and assumptions listed.
This report and its associated calculations supersede all other released MTBF and
Failure in Time (FIT) calculations of earlier report dates. The reported failure rates do
not represent catastrophic failure. Catastrophic failure rates will vary based on
application environment and features critical to the intended function.
4.3.1.1 Environmental Assumptions
Failure rates are based on a 40° C ambient temperature.
Applied component stress levels are 50 percent (voltage, current, and/or power).
Ground, fixed, controlled environment with an environmental adjustment factor
equal to 1.0.
4.3.1.2 General Assumptions
Component failure rates are constant.
Board-to-system interconnects included within estimates.
Non-electrical components (screws, mechanical latches, labels, covers, etc.) are
not included within estimations.
Printed circuit board is considered to have a 0 FIT rate.
Altitude
Operating
4000 m (13123 ft.)
Note: May require additional cooling above 1800 m (5905 ft.)
Storage 15000 m (49212 ft.)
Unpackaged Vibration
Operating
Sine sweep:
5 to 100 Hz: 1G @ 0.25 Octave/minute
100 to 500 Hz: 1G @ 1 Octave/minute
Random profile:
5 Hz @ 0.01 g2 /Hz to 20 Hz @ 0.02 g2 /Hz (slope up)
20 Hz to 500 Hz @ 0.02 g2 /Hz (flat)
3.13 g RMS, 10 minutes per axis for all 3 axes
Storage
5 to 50 Hz: 0.5G @ 0.1 Octave/minute
50 to 500 Hz: 3G @ 0.25 Octave/minute.
Shock
Operating 30G/11 ms half sine
Storage 50G, 170 inches/second trapezoidal
Table 5. Environmental Specifications (Sheet 2 of 2)
Table 6. Reliability Estimate Data
Reliability Measure Value
Failure Rate (FIT) 8967 failures in 10
9
hours
MTBF 111,513 hours