Filter
Top Products
MPCBL0010 SBC—BIOS Setup
Intel NetStructure
®
MPCBL0010 Single Board Computer
Technical Product Specification October 2006
78 Order Number: 304120
Table 44 shows remote access configuration options.
7.3.12 IPMI Configuration Sub-Menu
To access this sub-menu, select Advanced on the menu bar, then IPMI
Configuration.
System Management
Event Log Configuration
MPS Configuration
ATCA Channel Routing (PICMG)
On-board Devices Configuration
PCI Express Configuration
Remote Access Configuration
IPMI Configuration
USB Configuration
Main Advanced PCIPnP Boot Security Chipset Exit
Table 44. Remote Access Configuration Sub-Menu
Feature Options Description
Remote Access
Disabled
Enabled
Enable / Disable Remote Access function.
Serial Port Number
COM1
COM2
Selects serial port for remote access.
Serial Port Base Address Displays selected serial port base address.
Serial Port Mode
115200 8,N,1
57600 8,N,1
38400 8,N,1
19200 8,N,1
9600 8,N,1
Configures the serial port bits per second, data bits, parity,
stop bits, and flow control.
Flow Control
None
Hardware
Software
Enables and configures flow control type.
Redirection after BIOS
POST
Always
Disabled
Boot Loader
Specifies when redirection should occur.
Terminal Type
ANSI
VT-100
VT-UTF8
Specifies the target terminal type.
VT-UTF8 Combo Key
Support
Disabled
Enabled
Enabled VT-UTF8 combination key support for ANSI and VT-
100 terminals.
Notes:
1. Bold text indicates the default setting.
2. To use the Serial over LAN (SOL) feature described in Chapter 11.0, “Serial Over LAN (SOL)”, the
following settings must be used:
- Remote Access = Enabled
- Serial Port Number = COM2
- Flow Control = Hardware
- Redirection after BIOS POST = Always