Filter
Top Products
MPCBL0010 SBC—BIOS Setup
Intel NetStructure
®
MPCBL0010 Single Board Computer
Technical Product Specification October 2006
64 Order Number: 304120
7.3.1 CPU Configuration Sub-Menu
To access this sub-menu, select Advanced on the menu bar, then CPU Configuration.
Table 28. Advanced Menu
Feature Options Description
CPU Configuration
Select to display
sub-menu
Display CPU details, Enable/Disable Hyper-Threading**
technology.
IDE Configuration
Select to display
sub-menu
Display the primary IDE master and primary IDE slave
drive.
SuperIO Configuration
Select to display
sub-menu
Set parallel port address/interrupt.
ACPI Configuration
Select to display
sub-menu
Enable/Disable ACPI support for OS, Enable/Disable
additional ACPI 2.0 tables.
System Management
Select to display
sub-menu
Displays FRU, board, product, IPMI device, and firmware
information.
Event Log Configuration
Select to display
sub-menu
Enable/Disable error logging.
MPS Configuration
Select to display
sub-menu
Configure Multi-Processor Table.
ATCA Channel Routing
(PICMG)
Select to display
sub-menu
Select either the on-board GbE Fabric port, or the
AdvancedMC port for routing to AdvancedTCA backplane.
On-Board Device
Configuration
Select to display
sub-menu
Enable / Disable On-board devices.
PCI Express Configuration
Select to display
sub-menu
Configure PCI Express support.
Remote Access
Configuration
Select to display
sub-menu
Enable/Disable remote access.
IPMI Configuration
Select to display
sub-menu
IPMI configuration including server monitoring and event
log.
USB Configuration
Select to display
sub-menu
Enable/Disable USB devices.
Main Advanced PCIPnP Boot Security Chipset Exit
CPU Configuration
IDE Configuration
SuperIO Configuration
ACPI Configuration
System Management
Event Log Configuration
MPS Configuration
ATCA Channel Routing (PICMG)
On-board Devices Configuration
PCI Express Configuration