Filter
Top Products
Intel NetStructure
®
MPCBL0010 Single Board Computer
October 2006 Technical Product Specification
Order Number: 304120 81
BIOS Setup—MPCBL0010 SBC
7.3.13.1 USB Mass Storage Device Configuration
Table 48 shows USB Mass Storage Device Configuration options.
7.4 PCIPnP Menu
To access this menu, select PCIPnP from the menu bar at the top of the screen.
Table 49 shows PCI Plug and Play* options.
USB 2.0 Controller Mode
FullSpeed
HiSpeed
Configures USB 2.0 for HiSpeed (480 Mbps), or FullSpeed (12
Mbps).
BIOS EHCI Hand-Off
Disabled
Enabled
Enables work-around for operating systems without EHCI
hand-off support.
Note: Bold text indicates default setting.
Table 47. USB Configuration Sub-Menu (Continued)
Feature Options Description
Table 48. USB Mass Storage Device Configuration
Feature Options Description
Device # Display USB Mass Storage device(s) Name.
Emulation Type
Auto
Floppy
Forced FDD
Hard Disk
CDROM
If Auto, USB devices less than 530 MByte are emulated as
floppy and remaining as hard drive. Forced FDD option can be
used to force a HDD formatted drive to boot as FDD (Ex. ZIP
drive).
Note: Bold text indicates default setting.
Main Advanced PCIPnP Boot Security Chipset Exit
Table 49. PCIPnP Menu
Feature Options Description
Clear NVRAM
No
Yes
Clear NVRAM during system boot.
PCI Latency TImer
32
64
96
128
160
192
224
248
Value in units of PCI clocks for the PCI device latency
timer.
Allocate IRQ to PCI VGA
No
Yes
No = Does not assign PCI request to VGA even if VGA
request IRQ.
Yes = Assigns IRQ to VGA.
Note: Bold text indicates default setting.