Filter
Top Products
Intel NetStructure
®
MPCBL0010 Single Board Computer
October 2006 Technical Product Specification
Order Number: 304120 83
BIOS Setup—MPCBL0010 SBC
7.5.2 Boot Device Priority Sub-Menu
To access this sub-menu, select Boot on the menu bar, then Boot Device Priority.
Table 52 shows Boot Device Priority options.
Bootup Num-Lock
Off
On
Set power-on state for num-lock.
PS/2 Mouse Support
Disabled
Enabled
Auto
Set support for PS/2 mouse.
Wait For ‘F1’ If Error
Disabled
Enabled
Disable/enable waiting for F1 key to be pressed if error occurs.
Hit ‘DEL’ Message
Display
Disabled
Enabled
Display “Press DEL to run Setup” in POST.
Interrupt 19 Capture
Disabled
Enabled
Disable/enable the ability for option ROMs to trap interrupt 19.
Soft Reset
Disabled
Enabled
Enable/Disable soft reset support
Retry Boot Sequence
Disabled
Enabled
Retries boot sequence until a successful boot occurs.
Save CMOS in Flash
Disabled
Enabled
Saves CMOS contents into flash memory
Note: Bold text indicates default setting.
Table 51. Boot Settings Configuration Sub-Menu (Sheet 2 of 2)
Feature Options Description
Main Advanced PCIPnP Boot Security Chipset Exit
Boot Settings Configuration
Boot Device Priority
Hard Disk Drives
OS Load Timeout Timer
Table 52. Boot Device Priority Sub-Menu
Feature Options Description
1
st
Boot Device Displays detected boot devices Set the first boot device.
2
nd
Boot Device Displays detected boot devices Set the second boot device.
3rd Boot Device Displays detected boot devices Set the third boot device.