Filter
Top Products
Intel NetStructure
®
MPCBL0010 Single Board Computer
October 2006 Technical Product Specification
Order Number: 304120 73
BIOS Setup—MPCBL0010 SBC
Table 37. Event Log Configuration Sub-Menu
Feature Options Description
View Event Log View all unread events.
Mark all events as read Option to Mark all events as read.
Clear Event Log Discard all events in the log.
ECC Event Logging
Disabled
Enabled
Enable/Disable fatal error event logging.
Hub Interface Event
Logging
Disabled
Enabled
Enable/Disable Hub Interface error logging.
System Bus Event Logging
Disabled
Enabled
Enable/Disable System Bus error logging.
Memory Buffer Event
Logging
Disabled
Enabled
Enable/Disable Memory Buffer error logging.
PCI Error Logging
Disabled
Enabled
Enable/Disable PCI error events.
PCI Express Error Logging
Disabled
Enabled
Enable/Disable PCI Express error events.
PCI Express Error Masking Selects sub-menu
Machine-Check Exception
Action
Restart
Execution
Reboot System
Specifies what the machine-check exception handler should do
when program execution cannot be restarted reliably.
Note: Bold text indicates default setting.
Note: The event log reports both correctable memory errors (single bit) and
uncorrectable memory errors (double-bit or multi-bit). However, some double-
bit errors are correctable and some are not. If a double-bit error occurs that is
correctable, it will be logged as a correctable error (single bit).
7.3.6.1 PCI Express Error Masking Configuration Sub-Menu
To access this sub-menu, select Advanced on the menu bar, select Event Log
Configuration, then PCI Express Error Masking.
Table 38 shows PCI Express Error Masking options.
Table 38. PCI Express Error Masking Configuration Sub-Menu
Feature Options Description
Mask Duplicate Errors
No
Yes
Mask same errors if they are found in successive SMI
interrupts.
Mask Unsupported
Request
No
Yes
Unsupported Request Errors can be masked when set to ‘yes’.
If set to ‘no’, the default mask used is based on chipset
recommendations.
Note: Bold text indicates default setting.