Filter
Top Products
38 SKA4 Baseboard Product Guide
Table 24. Integrated Peripheral Configuration Submenu (continued)
Feature Choices Description
Base I/O Address 3F8h
2F8h
3E8h
2E8h
Selects the base I/O address for COM port B.
Interrupt IRQ 4
IRQ 3
Selects the interrupt for COM port B.
Parallel Port Disabled
Enabled
Auto
OS Controlled
If set to "Auto", BIOS configures the port.
If set to "OS Controlled", the OS configures the port.
Mode Output only
Bi-Directional
EPP
ECP
Selects mode for parallel port.
Base I/O Address
378
278
Selects the base I/O address for parallel port.
Interrupt IRQ 5
IRQ 7
Selects the interrupt for parallel port.
DMA Channel DMA 1
DMA 3
Selects the DMA channel for parallel port.
Floppy Disk Controller
Enabled
Disabled
If enabled, the system enables the floppy disk
controller.
Advanced Chipset Control Submenu
Table 25. Advanced Chipset Control Submenu
Feature Option Description
Base RAM Step
1 MB
1 KB
Every location
Selects the size of step to use during Base RAM tests.
Extended RAM Step
1 MB
1 KB
Every location
No Memory Test
Selects the size of the step to use during Extended
RAM tests.
Remap Memory Enable
Disable
Enables or disables remapping some amount of
memory lost to PCI devices. This is an advanced
feature. Consult the technical product specification
before changing this option.