Filter
Top Products
Removing and Installing Baseboard Components 75
4. Attach the internal cable to the internal connector on the ICMB card. The internal cable
connection to the card is noted by "A" in Figure 11.
OM09928
A
Figure 11. Internal Cable Attached to the ICMB Card
5. Connect the other end of the cable to the ICMB connector on the baseboard. The location of
the connector is shown in Figure 1 on page 14.
6. The ICMB kit contains an external cable. The cable attaches to the card’s external connector.
The external cable connection to the card is noted by "A" in Figure 12.
OM09929
A
Figure 12. External Cable Attached to the Card
Removing an ICMB Card
1. Disconnect the internal and external cables from the card and the baseboard.
2. Remove the screw securing the card to the chassis. The screw is noted by "A" in Figure 10 on
page 74.
3. Remove the ICMB card from the server.