Filter
Top Products
Configuration Software and Utilities 43
Hard Drive Submenu
For options on this menu, use the up or down arrow keys to select a device. Press the <+> or <->
keys to move the device higher or lower in the boot priority list.
Table 34. Hard Drive Submenu
Option Description
1. Drive #1 (or actual drive string)
2. Other bootable cards
(additional entries for each drive that
has a PnP header)
Other bootable cards cover all the boot devices that are not
reported to the system BIOS through BIOS Boot Specification
mechanisms. It may or may not be bootable, and may not
correspond to any device.
Removable Devices Selection Submenu
For options on this menu, use the up or down arrow keys to select a device.
Table 35. Removable Devices Selection Submenu
Feature Option Description
Lists Bootable Removable devices in
the system.
+/- This list includes legacy 1.44 MB floppy drives and
120 MB floppy drives.
Exit Menu
You can make the following selections on the Exit Menu. Select an option using the up or down
arrow keys. Press <Enter> to run the option. Pressing <Esc> does not exit this menu. You must
select one of the items from the menu or menu bar to exit.
Table 36. Exit Menu
Choices Description
Exit Saving Changes Exits and saves changes to CMOS.
Exit Discarding Changes Exits without saving changes to CMOS. User is prompted if any of
the Setup fields were modified.
Load Setup Defaults Loads default values for all Setup data.
Save Custom Defaults Loads settings from custom defaults.
Discard Changes Reads previous values of all Setup data from CMOS.
Save Changes Saves Setup data to CMOS.