Intel SKA4 Computer Hardware User Manual


 
Configuration Software and Utilities 41
Console Redirection Submenu
Table 29. Console Redirection Submenu
Feature Choices Description
COM Port Address:
Redirection
disabled
Disabled
3F8
2F8
3E8
When enabled, Console Redirection uses the I/O port specified.
When disabled, Console Redirection is completely disabled.
IRQ # 3 or 4 When Console Redirection is enabled, this displays the IRQ
assigned per the address chosen in the COM Port Address field.
Baud Rate 9600
19.2k
38.4k
115.2k
When Console Redirection is enabled, use the baud rate
specified.
When the Direct Platform Control (DPC) shares the COM port as
console redirection, the baud rate must be set to 19.2k to match
DPC baud rate, unless the autobaud feature is used.
Flow Control No flow control
CTS/RTS
XON/XOFF
CTS/RTS + CD
None disallows flow control.
CTS/RTS is hardware based flow control.
XON/XOFF is software flow control.
CTS/RTS +CD is hardware based plus carrier-detect flow control.
When DPC is sharing the Comm port as Console Redirection, the
flow control must be set to XON/XOFF or XON/XOFF+CD
depending on whether a modem is used.
EMP Configuration Submenu
Table 30. EMP Configuration Submenu
Feature Choices Description
EMP Password
Switch
Disabled
Enabled
Enabled/Disables EMP password.
EMP ESC
Sequence
+++ or other
text
Escape string for the modem EMP port.
EMP Hang-up Line
String
ATH or other
text
Hang-up string for the modem EMP port.
Modem Init String
ATE1Q0V1X4&
D0S0=0 or
other text
20 characters to set up the modem.
EMP Access Mode
Pre-Boot Only
Always
Active
Disabled
Establishes EMP access mode.
EMP Restricted
Mode Access
Disabled
Enabled
Enables/Disables EMP Restricted Mode Access.
EMP Direct
Connect/Modem
Mode
Direct Connect
Modem Mode
Establishes connection for EMP port.
System Phone
Number
[Phone number] Phone number of system you are dialing into.