Filter
Top Products
ZT8101 Users Guide 109
Using the Web Console
The table displays this information about the ports:
To configure static IP routes
1. In the left panel, click Forwarding.
2. In the top panel under IP Forwarding, click Static/Default Routes.
3. Click New and configure these fields.
4. Click Apply.
5. To delete a route, select the entry in the static/default route table and click Delete.
To configure static ARP
The ARP table maps an IP address to a device’s MAC address.
1. In the left panel, click Forwarding.
2. In the top panel under IP Forwarding, click Static ARP.
3. Click New and configure these fields.
4. Click Apply.
5. To delete a route, select the entry in the static ARP table and click Delete.
Field Description
Port The port number.
Flow Control Threshold The current value of the flow control threshold.
Drop Packet A status field that indicates whether the port is currently dropping packets.
Flow Control Status
A status field that indicates whether the port is currently implementing flow
control.
Port Connection
A status filed that indicates the port’s speed, duplex mode, and flow control
mode.
Field Description
IP Address Specifies the IP address to be statically entered into the IP forwarding table.
Subnet Mask Specifies the corresponding subnet mask for the IP address.
Gateway IP
Specifies the address of the next hop gateway for the IP address. This is
usually a router with a connection to a WAN or the Internet.
Metric
Specifies the Routing Information Protocol (RIP) metric. This is the number
of hops between the IP address and the gateway. This is a number between
1—15.
Field Description
Interface Name
Specifies the IP interface of the IP address that you are adding to the static
ARP table.
IP Address field Specifies the IP address of the end node or station.
MAC Address Specifies the MAC address corresponding to the IP address.