Filter
Top Products
ZT8101 Users Guide 87
Using the Web Console
Restart
1. To restart the switch, in the left panel click Reboot.
2. Click Yes to save the current switch configuration to non-volatile RAM (flash RAM), or No if
you want to restart the switch using the last-saved (previous) configuration.
3. Click Restart.
Factory Reset
The Factory Reset option is used to restart the switch using only the configuration that was
supplied by the factory. A factory reset returns all configuration options to their default values and
restores the switch’s configuration to the factory settings.
All user-entered configuration information is lost.
To reset the switch to factory default values
1. In the left panel, click Factory Reset.
2. Click Yes if you want the switch to retain its current IP address, or No to reset the switch’s IP
address to the factory default of 10.90.90.90.
3. Click Reboot.
Basic Settings
This section describes how to perform common monitoring and configuration tasks on the switch.
Condition Task
Using SNMP for network management
Configure the options in the Network Management
Setup screens.
Installing more than one switch
Use the Switch Utilities to save configurations for use
on multiple switches.
Testing communication with other devices
Use the Ping Test utility from the Switch Utilities
menu.
Need to set the port settings for the serial port to
values other than the default values
Configure the options with the Serial Port Settings
screen.