Filter
Top Products
88 ZT8101 Users Guide
Using the Web Console
Switch Information
The Switch Information screen displays descriptive information about the switch.
In the left panel, click Switch Information. This screen contains the following information.
Basic Switch Setup
Use the Basic Switch Setup screen to set the boot-up option for obtaining an IP address or to
manually assign an IP address for the switch.
1. In the left panel, click Basic Switch Setup.
This screen displays the current settings and allows you to configure these fields in the New
Switch IP Settings form.
2. To configure the IP address, configure these fields.
Field Description
Device Type Specifies the product name: ZT8101 Fast-Ethernet Switch.
MAC Address
Specifies the unique MAC address assigned to the switch. This address is not
configurable.
Boot PROM Version Specifies the version of the switch’s boot code.
Firmware Version
Specifies the version of the firmware installed on the switch. You can update this
using a switch utility.
Hardware Version Specifies the hardware version of the main board.
Device S/N Specifies the serial number of the device.
Name
Specifies the name assigned to the switch system. If you are installing multiple
switches, you should give each a unique name.
Location Specifies the area or location where the switch resides.
Contact Specifies the contact person for the switch.
Spanning Tree Indicates whether STP is enabled or disabled.
GVRP Indicates whether the Group VLAN Registration Protocol is enabled or disabled.
IGMP Snooping
Indicates whether the Internet Group Management Protocol Snooping is enabled
or disabled.
RIP Indicates whether the Routing Information Protocol is enabled or disabled.
PIM-DM
Indicates whether Protocol Independent Multicast - Dense Mode is enabled or
disabled.
DVMRP
Indicates whether the Distance Vector Multicast Routing Protocol is enabled or
disabled.
Parameter Default Description
Get IP From Manual
Specifies the method for assigning the switch an IP address.
Use the drop-down menu to select Manual, DHCP, or
BOOTP. (For more information about these options, see the
descriptions below.)
IP Address 10.90.90.90 Specifies the IP address assigned to the switch.