Filter
Top Products
DataSafe NAS User’s Manual 123
2. On the secondary menu bar, select Windows
and UNIX Shares.
3. From the Object Selection table (Figure 49 on
page 115), select the share for which you want to
add an FTP client.
4. Select Properties in the Tasks column.
5. From the Public Share Properties screen, place
a check in the FTP box, then click OK, at the
bottom of the screen.
6. You will be returned to the Shared Folders
screen.
7. Select Properties in the Tasks column.
8. On the Public Share Properties page, click the
FTP tab.
9. Specify permissions. You may choose to allow
read-only, write-only, or read/write permissions.
Check the Read check box to allow read access.
Check the Write check box to allow write access.
10. Click OK.
11. Select the FTP tab.
12. On the FTP tab
n Check the Read check box to allow read access.
n Check the Write check box to allow write access.
You may choose to allow read-only, write-only, or
read/write permissions.
13. Click OK.
To log client visits to an FTP share
1. On the primary menu bar, select Folders and
Shares.
2. On the secondary menu bar, select Shares.