Filter
Top Products
DataSafe NAS User’s Manual 33
you statically assign the IP address for the adapter. If
you have DHCP enabled, you can remove one or two
existing addresses and add different addresses, but
you will not be able to remove all WINS servers from a
DHCP-enabled adapter. If you remove two WINS
addresses and do not add at least one, DHCP will
automatically assign WINS addresses.
To change the WINS settings of the DataSafe
NAS
1. On the primary menu bar, click Network Setup.
2. On the Network Setup page, click Interfaces.
3. On the Object Selection table, select the network
connection to modify.
4. On the Tasks list, select WINS.
The WINS Configuration page (Figure 9) displays.
Figure 9 WINS Configuration
5. In the text box next to the Add button, type the IP
address of the WINS server, then click Add.
6. Repeat steps 4 and 5 for each WINS server IP
address you want to add.
7. Click OK.