Filter
Top Products
DataSafe NAS User’s Manual 24
To set or change the workgroup membership
of the DataSafe NAS
1. On the primary menu bar, click Network Setup.
2. On the Network Setup page, click Identification.
The Server Appliance Identity page (Figure 5) dis-
plays.
Figure 5 Server Appliance Identity
3. Select the Workgroup radio button and enter
the name of the workgroup to join.
4. If the DataSafe NAS belonged to a domain before
you joined the workgroup, the DataSafe NAS will
be disjoined from the domain and the computer
account will be disabled.
5. Click OK.
6. You will be asked to reboot the DataSafe NAS. You
may accept the reboot, or cancel it.
n If you click OK, the DataSafe NAS will reboot and
a page will appear indicating that the unit is
restarting. After the DataSafe NAS is back online,
you must reinitiate your browser, then return to