Filter
Top Products
DataSafe NAS User’s Manual 124
3. From the Object Selection table (Figure 49 on
page 115), select the share for which you want to
add an FTP client.
4. Select the FTP tab.
5. Check the Log visits check box.
6. Click OK.
Related Topics
n “Logs” on page 136
HTTP Share Properties
Use this page to specify which HTTP clients are
granted access to each share. Access can be granted
or denied on the basis of client host name. Access can
also be granted or denied on the basis of client
groups, where a client group contains one or more
client host names.
To allow clients permission to an HTTP share
1. On the primary menu bar, select Folders and
Shares.
2. On the secondary menu bar, select Shares.
3. From the Object Selection table (Figure 49 on
page 115), select the share for which you want to
add an HTTP client.
4. Select the HTTP tab.
5. On the HTTP tab
n Check the Read check box to allow read access.
n Check the Write check box to allow write access.
You may choose to allow read-only, write-only, or
read/write permissions.
6. Click OK.