Filter
Top Products
2 - 4 A-41069 January 1993
Using the NEXT key
To set or change an Image Address using the NEXT key (or Function Code
F97), simply press the NEXT key or enter Function Code F97.
The next Image Address will be displayed. An entry cursor will appear over
the first character of the next Image Address. Simply enter the desired
Image Address or use the left and right arrow keys to position the entry
cursor over the character to be set/changed and enter the desired value.
The Plus key (+) may also be used to move the entry cursor to the first
character in the next Image Address field, leaving the current Image
Address field unchanged.
All numeric keys (0 - 9) and the decimal key have dedicated keys on the
keyboard and can be entered directly.
For example if the current Image Address is 1201.01.020.005 and you want
to change it to 1201.02.000.000, the following steps would be used:
• Press the NEXT key or enter Function Code F97.
The entry cursor will appear over the first Fixed Field character
(1201.01.020.005).
• Press the Plus key (+) to leave the Image Address Field (1201)
unchanged.
• Enter .02.000.000.
• Press Enter to exit, saving the changes to the Image Address and
return to a normal operating display.
To set or change the Image Address Fixed Field, enter Function Code F92.
The number of characters in the Image Address Fixed Field is defined
during installation for each mode. Using Function Code F92, you will not be
allowed to enter more than the predefined number of characters.
The Fixed Field of the Image Address will be displayed. An entry cursor will
appear over the first character of the Fixed Field.
To enter numeric characters, simply input the desired value using the
numeric keys (0 - 9) on the keyboard and press Enter to input the value.
To enter alpha characters, you must enter the alpha entry mode by
pressing either the up or down arrow key. A portion of the alpha character
set will be displayed, with a flashing cursor appearing over one of the
characters.
If the desired alpha character does not appear in the display, press either
the up or down arrow key to display another portion of the alphabet.
The alpha character set consists of: upper-case English characters (A-Z), a
space ( ), six special characters ($ * - : < >), a dieresis (ä), beta (ß), n tilde
(ñ), o dieresis (ö), and u dieresis (ü).
NOTE: The plus sign (+) is also an acceptable character, input from the
control panel. However, it cannot be input as the first character
in the Fixed Field.
Using function code F92