Filter
Top Products
1 - 1
A-41069 January 1993
1 INTRODUCTION
The KODAK IMAGELINK
™
Scanner 900 is a medium- to high-speed (up
to 120 pages per minute†), high-resolution (up to 400 dpi) rotary scanner
designed for medium- to high-volume digitial capture of business
documents. The Scanner 900 captures printed characters, handwritten
text, and graphics from documents of various sizes (from 2.5 in [64 mm]
to 20 in [508 mm] long and from 2.5 in [64 mm] to 12 in [305 mm] wide)
and thicknesses (standard documents up to 0.014 in [0.36 mm]; even
thicker documents may be scanned using the gap release feature).
The KODAK IMAGELINK
™
Scanner 923 is a high-speed (up to 144
pages per minute†), medium- to high-resolution (up to 300 dpi) rotary
scanner designed for high-volume digitial capture of business
documents. The Scanner 923 captures printed characters, handwritten
text, and graphics from documents of various sizes (from 2.5 in [64 mm]
to 20 in [508 mm] long and from 2.5 in [64 mm] to 12 in [305 mm] wide)
and thicknesses (standard documents up to 0.014 inches [0.36 mm];
even thicker documents may be scanned using the gap release feature).
Scanner features The following features make the Scanners unique:
• Easy-to-reach Control Panel keys, identified by graphic symbols.
• A high-speed document transport system.
• A two-line 80-character display for status information and operator
messages.
• Full programmability of all eighteen (18) application modes, with
override capability.
• Linked modes may be used to carry over the Image Address from one
mode to another.
• Programmable keys to perform commonly-used functions.
• Transport-on functions; allows twenty-seven of the function codes to
be executed while the transport is running.
• Audible tones for selected functions, such as footswitch, patch
reading, etc.
• English or other language message display.
• A large, built-in workshelf.
• An adaptible, modular design for easy addition of accessories.
† Standard-sized documents fed in landscape orientation;
continuous transport using the Semi-Automatic Feeder.