Filter
Top Products
7 - 7
A-41069 January 1993
Area C - The lower roller
assembly area
To clear the lower roller assembly area:
1. Open the top cover.
2. Open the right-side access door.
3. Turn the baffle handle to unlatch the baffle plate. Pull the baffle
plate to the right until it stops. This unlocks the lower roller
assembly.
4. Grasp the lower roller assembly handle (as shown above) and slide
the assembly to the right (toward the back of the machine).
5. Remove any documents or document pieces.
IMPORTANT: Do not slide the lower roller assembly back into place
without first removing the image guides. Failure to
remove them first can cause misalignment and/or
damage to the machine.
6. Remove the imaging guides.
7. Slide the lower roller assembly back into place.
8. Turn the baffle handle to release the baffle plate.
Raise the plate into its original position.
9. Replace the imaging guides.
10. Close the right side access door and top cover.
NOTE: If the baffle plate is not securely locked into its original position,
documents will become lodged in this area.