Filter
Top Products
A-41069 January 1993
6-2
Operator message listing
Code Operator Message Displayed Description/Action Required
E000 Memory battery low - call service Call service - do not turn off the machine.
E100 Please wait No action required.
Wait for the message to clear.
E101 Auto shut off, press RUN Press the Run key to continue.
Feed documents.
E102 Press STOP and try again Press the Stop key and try again.
E103 Select valid mode Invalid mode selected.
Enter function code F01 to select another mode.
E104 Function not available Invalid function code entered.
Enter another function code.
E106 Warning - document length error Check the document length to see if it is shorter
than the minimum or longer than the maximum
allowed.
Refeed the document.
E107 Warning - skewed document Refeed the document.
E110 Upper lamp warning, press RUN Press the Run key to continue.
Change the lamps when the current set of
documents has been processed.
E111 Lower lamp warning, press RUN Press the Run key to continue.
Change the lamps when the current set of
documents has been processed.
E112 Invalid patch level Invalid patch was used.
Feed correct patch.
E113 Enter correct Image Address Use the NEXT key to enter correct Image Address.
E114 Check current level Check the current document image level.
Conflicting input regarding the proper level was
received.
E117 Enter correct level/Image Address Document image level assignment and next Image
E118 Address input conflict.
E119 Specify another document image level, or use the
NEXT key to enter a valid Image Address.
E120 Diagnostic running - do not use Please do not use; the machine is being serviced.