Filter
Top Products
5-1
A-41069 January 1993
There are a variety of functions available which may be used to
temporarily change operating conditions and values, and to obtain
system and accessory status information.
To execute a function code:
• Press the F key.
• Press the numeric keys which correspond to the desired function code.
• Press the Enter key.
Additional input may be necessary:
If the function is used to enable/disable an option
(turn an option on or off):
• Press the number one (1) key to turn the option ON;
or
Press the number zero (0) key to turn the option OFF.
• Press the Enter key.
If the function requires numeric input:
• Press the number key(s) required.
• Press the Enter key.
If the function is used to increment/decrement a measurement:
• Press the up arrow key to increment the measurement by
1 inch (25 mm);
or
Press the down arrow key to decrement the measurement by
1 inch (25 mm);
or
Press the right arrow key to increment the measurement by
1/8 inch (3 mm);
or
Press the left arrow key to decrement the measurement by
1/8 inch (3 mm).
• Press the Enter key.
To cancel a function or clear the Status Display after executing a
function, press the Clear/Cancel key.
5 FUNCTION CODES
Using function codes