Filter
Top Products
A-41069 January 1993
6-4
Code Operator Message Displayed Description/Action Required
E200 Verify/enter Image Address An error has occurred in the system and
E201 the Image Address may no longer be correct.
Use function code F08 to determine the last
Image Address.
Use the NEXT key to correct the Image Address,
if necessary.
E204 Skewed document - refeed Press the Clear key.
Use the NEXT key to enter the correct Image
Address and refeed document(s).
E205 Level overflow - press next level Press the Clear key.
Use the NEXT key to enter the correct Image
Address, or press a level key for a higher level.
E206 Check print head Install the correct Document Printer print head.
E207 Check printer installation Document Printer not correctly installed.
Properly install the Document Printer print head.
E211 Enter correct Image Address Use the NEXT key to enter correct Image Address.
E214 Document length error - refeed Press the Clear key.
Use the NEXT key to enter the correct Image
Address and refeed document(s).
E219 Clear error and refeed last doc Press the Clear key. Press the Run key and refeed
the last document.
E220 Check for jam in entrance transp Clear the document path.
Press the Clear key. Press the Jog key.
Press the Run key and refeed document(s).
E221 Clean entrance sensor Perform maintenance/cleaning procedures.
E225 Check for jam in transport Clear the document path.
Press the Clear key. Press the Jog key.
Press the Run key and refeed document(s).
E226 Clean slide-out sensor reflector Perform maintenance/cleaning procedures.
E227 Check for jam in transport Clear the document path.
Press the Clear key. Press the Jog key.
Press the Run key and refeed document(s).
E228 Check for jam in upper transport Clear the document path.
Press the Clear key. Press the Jog key.
Press the Run key and refeed document(s).
E229 Clean exit sensor Perform maintenance/cleaning procedures.