Filter
Top Products
3 - 7
A-41069 January 1993
Adjusting the feed shelf
position
Before you begin feeding documents into the Scanner, adjust the
position of the Feed Shelf:
To automatically feed multiple documents, the feed shelf should be in
the raised position (as shown above). To raise the feed shelf, grasp the
notch and lift the feed shelf. Swing the height adjustment legs out and
insert them into the groove on the work shelf.
To hand feed documents (one at a time), the feed shelf should be in the
down position (not shown). To lower the feed shelf, grasp the notch and
lift the feed shelf until the height adjustment legs are no longer resting in
the groove on the work shelf. Tuck the height adjustment legs in and
gently lower the feed shelf into position, level with the work shelf.
Height
Adjustment
Legs
Groove
Notch
Feed Shelf
Work Shelf