Filter
Top Products
II Network Setup - Administrators only 22
Chapter 4 Setting from the Control Panel
4-1. Network Setup List
This explains the settings required when connecting the copier to the network.
Set each setting item to match the environment of the network to which the copier is connected. When
changing the setting for each item, ask the network administrator.
TCP/IP Setup ( Page 27
This sets the items required for communicating with TCP/IP.
NetWare Setup ( Page 33)
This sets the items required for communicating with NetWare.
AppleTalk Setup ( Page 41)
This sets the items required for communicating with AppleTalk.
IPP Setup ( Page 44)
This sets the items required for IPP Printing.
FTP Setup ( Page 54)
This sets the items for sending scanned images from the Copier to the FTP server.
E-Mail (SMTP) Setup ( Page 57)
This sets the items required for sending scanned images from the Copier as E-mail attachments.
E-Mail (POP) Setup ( Page 63)
This sets the items required to use the POP server.
E-Mail Extended Config ( Page 69)
This is used to set the Reception/Disposition notifications for E-mail when the Internet fax is used.
Device Setup ( Page 72)
This sets the interface items.
List Print ( Page 75)
This prints out the setup list.
PC(SMB) Setup ( Page 76)
Sets the items required for sending scanned data to a shared folder of PC.
LDAP Setup ( Page 77)
Sets the items required for accessing the LDAP server to acquire a mail address for [Scan to E-Mail].