Filter
Top Products
Default Setting (System Menu)
OPERATION GUIDE 8-131
8
1 In the Sys. Menu/Count. menu, press the U or V
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
2 The System menu appears.
3 Press the U or V key to select [Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the U or V key to select [NetWare].
6 Press the OK key. NetWare appears.
7 Press the U or V key to select [On] or [Off].
If you select [On] and press the OK key, Frame
Type appears. Press the U or V key to select the
desired frame type.
The available frame types are as follows:
Auto
802.3
Sys. Menu/Count.:
a
b
1
Report
2
Counter
*********************
[ Exit ]
3
System
Login User Name:
L
b
*******************
Login Password:
[ Menu ] [ Login ]
System:
a
b
*********************
2
I/F Block Set.
3
Security Level
[ Exit ]
1
Network Setting
Network Setting:
a
b
*********************
2
NetWare
3
AppleTalk
[ Exit ]
1
TCP/IP Settings
NetWare:
a
b
*********************
2
On
1
*Off
Frame Type:
a
b
*********************
2
802.3
3
Ether-II
1
*Auto