Filter
Top Products
8-34
Default Setting (System Menu)
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
4 The Timer Settings menu appears.
5 Press the U or V key to select [Err. Clear Timer].
6 Press the OK key. Err. Clear Timer appears.
7 Press the U or V key to set the Error Clear Timer. Set
the amount of time before clearing errors in seconds.
You cannot use the numeric keys to enter this value.
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Auto Sleep
If no job runs for a certain period of time, automatically enter Sleep Mode. Refer to Sleep and Auto Sleep on page 2-
8 for Sleep Mode.
• Auto Sleep ON/OFF
Select whether to use Auto Sleep or not. The default setting is On.
NOTE: Time remaining before Auto Sleep can be modified as necessary.
Use the procedure below to specify the auto sleep setting.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
Login User Name:
L
b
*******************
Login Password:
[ Login ]
Timer Setting:
a
b
*********************
2
Sleep Timer
3
PanelReset Timer
[ Exit ]
1
Err. Clear Timer
Err. Clear Timer:*
b
(5 - 495)
******30*
sec.
Sys. Menu/Count.:
a
b
3
System
4
User/Job Account
*********************
[ Exit ]
5
Common Settings