Filter
Top Products
10
10-9
Troubleshooting
Send error.
####
2101, 2102, 2103, 2201, 2202, 2203,
3101: The network cable is
disconnected or the hub that it is
connected to is not operating
properly. Check the cable and the
hub. Otherwise, the server name or
the host name of the SMTP server is
not set correctly. Use COMMAND
CENTER and register the SMTP
server name and the host name
correctly.
2204: The E-mail size exceeds the
acceptable send data capacity.
Decrease the size or resolution of the
scanned data to be transmitted and
resend the E-mail.
5101, 5102, 5103, 5104, 7102, 720f:
Turn the main power switch off and
back on. If this error occurs several
times, make a note of the displayed
error code and contact your service
representative.(Refer to the
corrective action for the error
message “ An error has occurred.”)
9181: The scanned original exceeds
the acceptable number of pages of
999. Send the excess pages
separately.
—
Error occurred.
Turn the main power
switch off and on.
– System error has occurred. Turn the
main power switch off and on.
—
Incorrect account ID. – The Account ID does not match.
Check the registered Account ID.
—
The phone receiver is
off the hook.
Hang Up.
– Put down the receiver. —
File is not found.
Job is canceled.
– The specified file is not found. The
job is canceled. Press the OK key.
—
KPDL error. Job is
canceled.
– The job is canceled. Press the OK
key.
—
Print overrun. Job is
canceled.
– The job is canceled. Press the OK
key.
—
Top tray is full of
Paper.
Remove the paper.
– Remove paper from the top tray, and
press the OK key to resume the job.
—
Error Message Check points Corrective Actions
Reference
Page