Filter
Top Products
PremierWave XC User Guide 18
3: Installation of PremierWave XC
This chapter describes how to install the PremierWave XC device server. It contains the following
sections:
Package Contents
User-Supplied Items
Hardware Components
Installing the PremierWave XC
Package Contents
The PremierWave XC package includes the following items:
PremierWave XC device
3-pin Terminal Mating Connector
6-pin Terminal Mating Connector
RJ-45 Ethernet Straight Cat5 Cable, 1.5 meter
External Antenna, SMA Connector
Power Supply 12VDC with International Adapters
Mounting Components (DIN Rail Mounting Adapter, Cover Plates, and Rubber Feet)
Quick Start Guide
User-Supplied Items
To complete your installation, you need the following items:
RS-232/422/485 serial devices that require network connectivity.
- A serial cable, as listed below, for each serial device. One end of the cable must have a
female DB9 connector for the serial port.
- A null modem cable to connect the serial port to another DTE device.
- A straight-through modem cable to connect the serial port to a DCE device.
An available connection to your Ethernet network and an Ethernet cable.
A working SIM card from your Network Carrier or Service Provider
A working DDNS Account with DynDNS.com
A working power outlet if the unit will be powered from an AC outlet using the included
12VDC power supply.
An additional power supply (9-30VDC) to power the device using the 3-pin terminal
connector.