Filter
Top Products
6: Network Settings
PremierWave XC User Guide 41
To Configure Network 2 Roam Settings
Using Web Manager
To modify Network 2 GSM/GPRS band settings, click Network on the menu bar and select
Network 2 → Configuration → Roam
Using the CLI
To enter the Network 2 GSM/GPRS command level:
enable -> config -> if 2 ->link -> roam
Using XML
Include in your file: <configgroup name="roam">
Network 2 GSM/GPRS Bands Settings
The table below shows the settings for GSM/GPRS Bands settings.
Table 6-8 Network 2 (wwan0) GSM/GPRS Bands Settings
Network 2 (wwan0)
GSM/GPRS Settings
Description
GSM/GPRS Bands
Select the GSM/GPRS Bands if needed:
Auto (Default)
GSM-900
GSM-1800
GSM-850
GSM-1900
Note: These bands are the wwan0 frequencies designated by the ITU for the
operation of GSM mobile phones. Typically Auto should suffice in most cases and
should not be changed unless the unit is unable to determine the specific band
used by your provider.
GSM bands 900 & 1800 are used in
most parts of the world, with the exception of
places such as USA, Brazil and Canada where GSM bands 850 & 1900 are used.
Changes do not take effect until after reboot.
To Configure Network 2 GSM/GPRS bands Settings
Using Web Manager
To modify Network 2 GSM/GPRS band settings, click Network on the menu bar and select
Network 2 → Configuration → GSM/GPRS Band
Using the CLI
To enter the Network 2 GSM/GPRS command level:
enable -> config -> if 2 ->link -> gsm gprs band