Filter
Top Products
11: Maintenance and Diagnostics Settings
PremierWave XC User Guide 74
Table 11-5 ICMP Network Stack Settings
Protocol Stack
ICMP Settings
Description
State
Select Enabled or Disabled. The State selection is used to turn on/off
processing of ICMP messages. This includes both incoming and outgoing
messages.
To Configure ICMP Network Stack Settings
Using Web Manager
To configure ICMP protocol settings, click Protocol Stack in the menu bar and select ICMP.
Using the CLI
To enter the command level: enable -> config -> icmp
Using XML
Include in your file: <configgroup name=”icmp”>
Table 11-6 ARP Network Stack Settings
Protocol Stack
ARP Settings
Description
IP Address
Enter the IP address to add to the ARP cache.
MAC Address
Enter the MAC address to add to the ARP cache.
To Configure ARP Network Stack Settings
Using Web Manager
To configure ARP protocol settings, click Protocol Stack in the menu bar and select ARP.
Using the CLI
To enter the command level: enable -> config -> arp
Using XML
Include in your file: <configgroup name=”arp”>