Filter
Top Products
PremierWave XC User Guide 61
9: Services Settings
DNS Settings
This section describes the active run-time settings for the domain name system (DNS) protocol.
The primary and secondary DNS addresses come from the active interface. The static addresses
from the Network Interface configuration settings may be overridden by DHCP or BOOTP.
Note: The blue text in the XML command strings of this chapter are to be replaced with
a user-specified name.
Table 9-1 DNS Settings
Setting / Field Description
Lookup
Perform one of the following:
Enter an IP address, and perform a reverse Lookup to locate the hostname for
that IP address
Enter a hostname, and perform a forward Lookup to locate the corresponding IP
address
To View or Configure DNS Settings
Using Web Manager
To view DNS current status, click DNS in the menu bar.
To lookup DNS name or IP address, click DNS in the menu bar to access the Lookup field.
To configure DNS for cases where it is not supplied by a protocol, click Network in the menu
bar and select Interface -> Configuration.
Using CLI
To enter the DNS command level: enable -> dns
Using XML
Include in your file: <configgroup name=”interface” instance=”eth0”>