Filter
Top Products
6: Network Settings
PremierWave XC User Guide 43
Network 2 APN Configuration Settings
The APN is a Network Identifier used by the carrier to determine the type of network service you
requested for your mobile device. Your service provider will provide the APN information along
with your SIM card.
Note: Make sure that the APN, User Name, Password and Dialup Number is entered
correctly. If not, GPRS attachment would fail. This typically refers to the Data Network
Access (GPRS). GSM (Text SMS) functionality typically does not require APN to operate.
The table below shows the settings for APN configuration.
Table 6-10 Network 2 (wwan0) APN Configuration Settings
Network 2 (wwan0)
APN Configuration Settings
Description
APN
Enter Access Point Name (APN).
User name
Enter or modify user name.
Password
Enter or modify password.
Dialup number
Enter or modify dialup number of APN.
To Configure Network 2 APN Configuration Settings
Using Web Manager
To modify Network 2 APN Configuration settings, click Network on the menu bar and select
Network 2 → Configuration → APN Configuration
Using the CLI
To enter the Network 2 APN Configuration command level:
enable -> config -> if 2 -> link -> apn
Using XML
Include in your file: <configgroup name="ppp">