Filter
Top Products
12: Advanced Settings
PremierWave XC User Guide 90
Relay Output Settings
The PremierWave XC allows Relay Output state to be controlled by events, user commands and
SMS inbound messaging.
Configuration of the Relay Output settings allow you to configure the initial state for the Relay
Output after boot up, test the Open and Close state of the relay, and configure the SMS inbound
message to control the Open and Close state of the Relay output.
Table 12-9 Relay Output Settings
Relay Output Settings Description
Initial State Select Initial State of the relay output to be opened or closed.
State Preservation
Select to enable or disable preserving the relay output state after warm
boot.
SMS Open CMD
Customize: SMS text controls the relay output to be in open state.
SMS Close CMD
Customize: SMS text controls the relay output to be in close state.
To Configure Relay Output Settings
Using Web Manager
To configure Relay Output settings, click Relay Output on the menu bar.
Using the CLI
To enter the XML command level: enable -> relay output
Using XML
Include in your file: <configgroup name=”relay output”>