Filter
Top Products
11: Maintenance and Diagnostics Settings
PremierWave XC User Guide 78
Diagnostics: Ping Settings Description
Timeout
Enter the time, in seconds, for the PremierWave XC to wait for a
response from the host before timing out. The default is 5 seconds.
To Ping a Remote Host
Using Web Manager
To ping a Remote Host, click Diagnostics in the menu bar and select Ping.
Using the CLI
To enter the command level: enable
Using XML
Not applicable.
Traceroute
Here you can trace a packet from the PremierWave XC to an Internet host, showing how many
hops the packet requires to reach the host and how long each hop takes. If you visit a web site
whose pages appear slowly, you can use traceroute to determine where the longest delays are
occurring.
Table 11-11 Traceroute Settings
Diagnostics:
Traceroute Settings
Description
Host
Enter the IP address or DNS hostname. This address is used to show the path
between it and the PremierWave XC when issuing the traceroute command.
Protocol
Select the traceroute protocol:
TCP
ICMP
UDP
To Perform a Traceroute
Using Web Manager
To perform a Traceroute, click Diagnostics in the menu bar and select Traceroute.
Using the CLI
To enter the command level: enable