Filter
Top Products
3: Installation of PremierWave XC
PremierWave XC User Guide 22
LED Description
USB 1
GREEN - a USB device is connected to USB 1 Host port and is functioning
properly
OFF- no USB device is connected to USB 1 Host port
USB 2
GREEN - a USB device is connected to USB 2 Host port and is functioning
properly
OFF- no USB device is connected to USB 2 Host port
Fault
RED- blinking when Events or Errors occurred
OFF - system functioning normally
GSM Signal Strength
GREEN – 3 to 5 LEDs lighted. Good to Strong signal strength
AMBER/GREEN – 1 to 2 bi-colored LEDs lighted. Weak signal strength
Side Panel
On the PremierWave XC side panel, there is a 6-pin Terminal Connector for Relay and I/Os as
well as an SMA Antenna Connector as shown in Figure 3-7.
Figure 3-7 PremierWave XC Side View
Table 3-2 PremierWave XC Side View
Connector Description
Relay Output
Outputs Support 1A 24V
Inputs
Inputs accept voltage 0 to 30 VDC
ON
Max 30 VDC
Min 2 VDC
OFF
Max 0.7 VDC
Min 0 VDC
Antenna
Connect the provided SMA Antenna