Filter
Top Products
4: Network Settings
xPico® Wi-Fi® Embedded Device Server User Guide 27
Using CLI
To enter the WLAN Profile command level: config -> WLAN Profile <instance>
Using XML
Include in your file: <configgroup name = "WLAN Profile" instance = "name">
Table 4-5 WLAN Profile Basic Settings
Table 4-6 WLAN Profile Security Settings
WLAN Profile Basic
Settings
Description
Network Name (SSID) Specify the name of the wireless network (SSID.)
State Select to enable or disable this profile.
WLAN Profile
Security Settings
Description
Suite Specify the security suite to be used for this profile.
None = no authentication or encryption method will be used.
WEP = Wired Equivalent Privacy
WPA = WiFi Protected Access
WPA2 = Robust Secure Network.
Key Size Select the appropriate key size in bits. Select 40 for WEP40 and WEP64; select
104 for WEP104 and WEP128.
Note: This option is available if WEP suite is selected above.
TX Key Index Select one of four index listing keys for transmitting data. Reception is allowed
with all four keys.
Note: For operability with some products that generate four identical keys from a
passphrase, this index must be one. This option is available if WEP suite is
selected above.
Key 1-4 Enter one or more encryption keys in hexadecimal format. Enter 10 hexadecimal
digits (0-9, a-f) for WEP40 and 26 for WEP104. The configured keys are not
shown for security reasons.
Note: This option is available if WEP suite is selected above.
WPAx Key Type Select the format of the security key.
Note: This configuration option becomes available only when suites, WPA or
WPA2 are selected.
WPAx Key Enter the WPAx key.
Note: This configuration option becomes available only when suites, WPA or
WPA2 are selected and the Hex key type is selected.