Filter
Top Products
Appendix A: Command Reference
xPico® Wi-Fi® Embedded Device Server User Guide 87
configitem WLAN Profile delete
value name
name may contain up to 35 characters.
configgroup Modem Emulation
Connections can be initiated and accepted using Modem "AT" commands incoming from the Serial Line.
configitem Listen Port
value
Specify a Listen Port to accept connections on.
Blank the value for "<None>".
configitem Echo Pluses
value
With Echo Pluses enabled, pluses will be echoed back during a "pause +++ pause" escape sequence on the
Serial Line.
Echo Pluses may be "Enabled" or "Disabled".
configitem Echo Commands
value
With Echo Commands enabled (ATE1), characters read on the Serial Line will be echoed while the Line
is in Modem Command Mode.
Echo Commands may be "Enabled" or "Disabled".
configitem Verbose Response
value
With Verbose Reponse enabled (ATQ0), Modem Response Codes are sent out on the Serial Line.
Verbose Response may be "Enabled" or "Disabled".
configitem Response Type
value
Response Type selects either Text (ATV1) or Numeric (ATV0) representation for the Modem Response
Codes sent out on the Serial Line.
Response Type may be "Text" or "Numeric".
configitem Error Unknown Commands
value
With Error Unknown Commands enabled (ATU0), ERROR is returned on the Serial Line for
unrecognized AT commands. Otherwise (ATU1) OK is returned for unrecognized AT commands.
Error Unknown Commands may be "Enabled" or "Disabled".