Lantronix 900-691-R Network Card User Manual


 
Appendix A: Command Reference
xPico® Wi-Fi® Embedded Device Server User Guide 83
Instance may contain up to 32 characters.
value State
Enable the State to allow the named Application to hold power on.
State may be "Enabled" or "Disabled".
configitem Maximum Time Powered Down
value
Maximum Time Powered Down has units of seconds.
Blank the value for "<Infinite>".
configitem WKUP Pin Power Up
value
WKUP Pin Power Up may be "Enabled" or "Disabled".
configitem Time Powered Up
value
Time Powered Up has units of seconds.
Blank the value for "<Infinite>".
configgroup SPI
These settings pertain to the Serial Peripheral Interface (SPI) Bus Master device. Changes take effect
immediately.
configitem Name
value
The Name is for display purposes only.
Name may contain up to 25 characters.
configitem State
value
State selects the operating state of the SPI:
Enabled enables the SPI.
Disabled disables the SPI.
State may be "Enabled" or "Disabled".
configitem Protocol
value
Protocol selects the application to connect to the SPI:
None selects no application to connect to the SPI.
Monitor selects the Monitor application to connect to the SPI.
Protocol may be "None" or "Monitor".