Filter
Top Products
10: Advanced Settings
xPico® Wi-Fi® Embedded Device Server User Guide 53
--------------------------------- ----------------------------------
a move cursor to begin of line b move cursor backward word
d delete character under cursor f move cursor forward word
e move cursor to end of line [A previous command
k delete to end of line [B later command
l redraw line [C move cursor right
r redraw line [D move cursor left
u delete to begin of line <escape> delete word to left
w delete word to left
>
6. Enter XML commands and utilize either xcr dump or secret xcr dump to dump xml
configuration information.
7. Copy and paste the configuration text into notepad or some other basic text editor.
8. Remove all the spaces in the script within the text editor. This basic text is the exported XML
configuration and is now available for copy-paste into any xPico Wi-Fi embedded device server.
9. Make any additional changes to the configuration text to modify the XML configuration.
10. Copy and paste <CR> all of the text into the terminal emulator connected to the desired xPico
Wi-Fi embedded device server, to "import" the new configuration.
Note: Software flow control experiences overrun above 460800 baud.
Performance Settings
Change settings pertaining to performance including application, maximum time powered down,
wake-up pin power up, and time powered up.
Table 10-1 Performance Settings
Modem Emulation Settings Description
Application Select the performance application:
Tunnel Accept
Tunnel Connect
Command Line
HTTP Server
Any application selected for performance may hold the power on
longer or wake up sooner.
Maximum Time Powered Down Indicates the maximum amount of time for the device to be
powered down. After this time, the device wakes up.
WKUP Pin Power Up Enable or disable WKUP pin power up. The device wakes up on
the rising edge of WKUP, if enabled.
Time Powered Up Indicates the amount of time for the device to be powered up. After
this time, the device powers down.