Lantronix 900-691-R Network Card User Manual


 
6: Tunnel Settings
xPico® Wi-Fi® Embedded Device Server User Guide 42
ATUn Accept unknown commands. (n=0: off, n=1: on).
ATVn Verbose mode (n=0: numeric result codes, n=1: text result codes.)
ATXn Command does nothing and returns OK status.
ATZ Restore active settings from defaults.
AT&F Reset saved settings in NVR to factory defaults.
AT&V Display current and saved settings.
AT&W Save active settings to NVR.
AT&Z Restore active settings from NVR.
A/ Repeat last command.
+++ Switches to command mode if entered from serial port during connection.
Command Description