Filter
Top Products
3. Remove the battery. See “Replacing the battery” on page 69.
4. Remove the keyboard. See “Replacing the keyboard” on page 74.
5. If a memory module is already installed in the memory slot, release the latches on both edges of the
socket at the same time. Then remove it. Save the removed memory module for future use.
6. Find the notch on the contact edge side of the new memory module you are installing.
Attention: To avoid damaging the memory module, do not touch its contact edge.
7. Ensure that the notch on the memory module aligns correctly with the key in the memory slot, then
insert the memory module into the socket at an angle of about 20 degrees. Press it in rmly.
Note: Insert the memory module into the socket at an angle of about 20 degrees.
8. Pivot the memory module downward until it snaps into place.
9. Ensure that the memory module is rmly xed in the slot and does not move easily.
Chapter 6. Replacing devices 79