Filter
Top Products
6. Find the notch on the contact edge side of the new memory module you are installing.
Attention: To avoid damaging the memory module, do not touch its contact edge.
7. Ensure that the notch on the memory module aligns correctly with the key in the memory slot, then
insert the memory module into the socket at an angle of about 20 degrees. Press it in rmly.
Note: Insert the memory module into the socket at an angle of about 20 degrees.
8. Pivot the memory module downward until it snaps into place.
9. Reinstall the memory slot cover back in place.
10. Reinstall the battery back.
11. Turn the computer over again. Connect the ac power adapter and all cables.
Replacing the optical drive
Before you start, print these instructions.
Chapter 6. Replacing devices 81